Back to news
21 February 2017

Dockside Mains Distribution Unit

MO18149 – Free standing 3 Compartment 304 grade stainless steel enclosure IP66 with polyester powder coat paint finish for 400 volt operation. The main Isolator is located behind a front hinged door with padlock hasp facility and is operated by a door interlocked external rotary handle and is above an open sided stainless steel mounting frame. All output control devices for this unit are fitted on rear and are located behind a hinged door with padlock hasp facility along with all socket outlets not allowing uncoupling of plugs when in use and safely locked away when not in service. All other detail is as listed below
Incoming:
1 x 400 amp 4 pole mains isolator
1 x multifunction meter
Outgoing:
1 x internal light and mcb
1 x thermostatically controlled heater circuit
2 x RJ45 sockets
2 x 16 amp 2 pole 30mA RCBO’s via 2 x 13 amp 3 pin 230 volt socket outlets
2 x 250 amp 3 pole MCCB’s c/w fully adjustable EARTH LEAKAGE devices via 2 x 125 amp 5 pin 400 volt socket outlets
2 x 125 amp 3 pole MCB’s c/w fully adjustable EARTH LEAKAGE devices via 2 x 125 amp 5 pin 400 volt socket outlets
1 x 63 amp 3 pole MCB c/w fully adjustable EARTH LEAKAGE device via 1 x 63 amp 5 pin 400 volt socket outlet
1 x 32 amp 3 pole MCB c/w fully adjustable EARTH LEAKAGE device via 1 x 32 amp 5 pin 400 volt socket outlet
2 x 16 amp 2 pole 30mA RCBO’s via 2 x 16 amp 3 pin 230 volt socket outlets
2 x 63 amp 3 pole MCB’s c/w 63 amp 4 pole 100mA fixed RCCB’s via hard wired permanent supply circuits
2 x 32 amp 3 pole MCB’s c/w 63 amp 4 pole 100mA fixed RCCB’s via hard wired permanent supply circuits
All Terminals, wiring & accessories supplied to complete
(This style can be supplied with numerous combinations & qtys of equipment, available upon request)