clearClose

125A Distribution Outlet

MO17765 – GRP Enclosure mounted on Free standing frame IP65
Externally mounted 125A 5Pin 400V socket and supply switch with MCB/RCD protection together with
Check Meter operable via IP65 Clear Polycarbonate Windows.
Terminals, wiring & accessories supplied to complete.

Contacts

clearClose

Distribution Unit

MO17655 – Sheet Steel Triple Compartment Enclosure with Polyester Powder Coating on Free Standing Frame, complete with removable gland plates fitted to base. Ingress Protection IP65 c/w Padlockable hasps & 2x ¼ turn Double Bar Key Locks on each Door.
Central Compartment – 200A 4Pole Incoming Supply MCCB & busbar chamber supplying to:
L/H & R/H Compartments– Each housing 15 MCBRCD Combinations for associated externally side mounted socket outlets.
Safety Screens, Terminals, wiring & accessories supplied to complete.

Contacts

clearClose

Dockside Mains Distribution Unit

MO18149 – Free standing 3 Compartment 304 grade stainless steel enclosure IP66 with polyester powder coat paint finish for 400 volt operation. The main Isolator is located behind a front hinged door with padlock hasp facility and is operated by a door interlocked external rotary handle and is above an open sided stainless steel mounting frame. All output control devices for this unit are fitted on rear and are located behind a hinged door with padlock hasp facility along with all socket outlets not allowing uncoupling of plugs when in use and safely locked away when not in service. All other detail is as listed below
Incoming:
1 x 400 amp 4 pole mains isolator
1 x multifunction meter
Outgoing:
1 x internal light and mcb
1 x thermostatically controlled heater circuit
2 x RJ45 sockets
2 x 16 amp 2 pole 30mA RCBO’s via 2 x 13 amp 3 pin 230 volt socket outlets
2 x 250 amp 3 pole MCCB’s c/w fully adjustable EARTH LEAKAGE devices via 2 x 125 amp 5 pin 400 volt socket outlets
2 x 125 amp 3 pole MCB’s c/w fully adjustable EARTH LEAKAGE devices via 2 x 125 amp 5 pin 400 volt socket outlets
1 x 63 amp 3 pole MCB c/w fully adjustable EARTH LEAKAGE device via 1 x 63 amp 5 pin 400 volt socket outlet
1 x 32 amp 3 pole MCB c/w fully adjustable EARTH LEAKAGE device via 1 x 32 amp 5 pin 400 volt socket outlet
2 x 16 amp 2 pole 30mA RCBO’s via 2 x 16 amp 3 pin 230 volt socket outlets
2 x 63 amp 3 pole MCB’s c/w 63 amp 4 pole 100mA fixed RCCB’s via hard wired permanent supply circuits
2 x 32 amp 3 pole MCB’s c/w 63 amp 4 pole 100mA fixed RCCB’s via hard wired permanent supply circuits
All Terminals, wiring & accessories supplied to complete
(This style can be supplied with numerous combinations & qtys of equipment, available upon request)

Contacts

clearClose

Free Standing 4 compartment Power Distribution Unit

MO17356 – Enclosure 1600x1000x600(HxWxD) Sheet Steel with Polyester Powder Coating.
Ingress Protection IP65 c/w Front and rear access doors for Supply Inlet / Isolation compartment & Supply Output Compartment. Complete with free standing support frame with skids for fork transportation/locating.
Compartment 1 – Key Lockable door via 2xTee Bar ¼ turn handles.
1x 630A 4 Pole Incoming supply Isolating switch – feeding to compartment 2.
Compartment 2 – Key Lockable door via 2xTee Bar ¼ turn handles.
Front Power cluster output fitted with 3x 63A & 3x 32A 5 Pin 400V Socket Outlets together with associated MCB/RCD protection.
Compartments 3 & 4 (Rear) – 1x 10KVA 3Phas 400/110V Transformer supplying:
Rear Power cluster output fitted with 7x 16A & 3x 32A 3 Pin 110V Socket Outlets together with associated MCB protection.
All Terminals, wiring & accessories supplied to complete.
(This style can be supplied with numerous combinations & qtys of equipment, available upon request)

Contacts

clearClose

Free Standing Four compartment Mains Distribution Unit

MO16112 – A2 Stainless Steel sheet Enclosure with 4 point lifting facility with Polyester Powder Coat Finish.
Mounted on fully galvanised base frame c/w 2 folk lift transport channels
IP66/67 c/w Front and rear access doors fitted with 2xTee Bar ¼ turn handles & Padlockable hasp.
Fitted & wired with the following:
Incoming:
1x 400A TP MCCB with external operating door interlocked handle c/w under voltage release.
1x Fully adjustable earth leakage sensor device.
1x Neutral Link.
Externally Mounted Outputs:
3 x 63A 5 Pin 400V IP67 Sockets
3 x 32A 5 Pin 400V IP67 Sockets
3 x 32A 3 Pin 230V IP67 Sockets
7 x 16A 3 Pin 230V IP67 Sockets
3 x 32A 3 Pin 110V IP67 Sockets
7 x 16A 3 Pin 110V IP67 Sockets
All Sockets Individually protected with RCCB/MCB combination or RCBOs.
110V sockets supplied via internally mounted 10KVA 3PH 400/110V Transformer
All Terminals, protection, wiring & accessories supplied to complete.
(This style can be supplied with numerous combinations & qtys of equipment, available upon request)

Contacts

clearClose

Mains Distribution Unit

MO13982 – Sheet Steel Enclosure with Polyester Powder Coating on Free Standing Frame, complete with removable gland plate fitted to base. Ingress Protection IP65 c/w Padlockable hasp & 2x ¼ turn Double Bar Key Locks on Single Front Door. Internal fittings:
1x 8way TP&N unpopulated Pan assembly complete with Main Isolator – 125A 4 Pole RCCB 100mA Trip.
1x Safety Screen with blanking covers.
All Terminals, wiring & accessories supplied to complete.

Contacts

clearClose

Mains Distribution Unit

MO16179 – Sheet Steel Double Compartment Enclosure with Polyester Powder Coating on Free Standing Frame, complete with removable gland plate fitted to base. Ingress Protection IP65 c/w Padlockable hasp & 2x ¼ turn Double Bar Key Locks on Front Doors. Internal fittings:
1x 8way TP&N populated Pan Assembly supplying 8x 5Pin 400V Socket outlets mounted externally on LH side and base.
Incoming supply Compartment – 200A 3P+N MCCB fitted with door interlocking operating handle & variable RCD.
Safety Screens, Terminals, wiring & accessories supplied to complete.

Contacts

clearClose

Mains Distribution Unit

MO16673 – Sheet Steel Triple Compartment Enclosure with Polyester Powder Coating on Free Standing Frame, complete with removable gland plates fitted to base. Ingress Protection IP65 c/w Padlockable hasps & 2x ¼ turn Double Bar Key Locks on each Door.
Compartment 1 – 630A 4Pole Incoming Supply MCCB & busbar chamber supplying to:
Compartments 2 & 3 – Each housing up to 8 MCCBs each c/w Variable RCD protection.
Safety Screens, Terminals, wiring & accessories supplied to complete.

Contacts

clearClose

Mains Distribution Unit

MO17463 – Wall Mountable Sheet Steel Double Compartment Enclosure with Polyester Powder Coating with lifting plates.
c/w removable gland plates fitted to base. Ingress Protection IP65 c/w Padlockable hasp & 2x ¼ turn Double Bar Key Locks on Front Doors. Internal fittings:
Incoming supply Compartment – 400A 3P+N MCCB fitted with door interlocking operating handle – supply to busbar feeding:
Compartment 2 – 6x125A, 3Pole MCCB Outputs. + Auxiliary lighting circuits.
Safety Screens, Terminals, wiring & accessories supplied to complete.

Contacts

clearClose

Mains Distribution Unit

MO16338 – Sheet Steel Enclosure with Polyester Powder Coating on Free Standing Frame, complete with removable gland plate. fitted to base. Ingress Protection IP65 c/w Padlockable hasps & 2x ¼ turn Double Bar Key Locks on Single Front Door.
Primary Compartment Housing Isolator, protection, Aux Transformer & controls for 6 Socket outlets – 2 off each 400V 3phase, 230V single phase & 110V 2Pole.
Secondary compartment screed via bolt on cover housing 1x large terminal set to accommodate large incoming supply cable.
Terminals, wiring & accessories supplied to complete.

Contacts

clearClose

Mains Distribution Unit

MO18155 – Sheet Steel Enclosure with Polyester Powder Coating on Free Standing Frame, complete with removable gland plate fitted to base. Ingress Protection IP65 c/w Padlockable hasp & 2x ¼ turn Double Bar Key Locks on Single Front Door.
1x 8way TP&N populated Pan assembly with 6xMCBs for side mounted sockets & Main Isolator – 125A 4 Pole RCCB
1x Safety Screen with blanking covers. Input via 63A 5 pin Plug on 10m flexible lead.
All Terminals, wiring & accessories supplied to complete.

Contacts

clearClose

Mains Distribution Unit

MO17414 – Wall Mountable Sheet Steel Double Compartment Enclosure with Polyester Powder Coating with lifting plates.
c/w removable gland plates fitted to base. Ingress Protection IP65 c/w Padlockable hasp & 2x ¼ turn Double Bar Key Locks on Front Doors. Internal fittings:
Incoming supply Compartment – 250A 4 Pole Isolator with door interlocking operating handle – supply to busbar feeding:
Compartment 2 – 4x63A & 6x32A, 4Pole RCBO for externally mounted 3P+N+E Socket outlets.
Safety Screens, Terminals, wiring & accessories supplied to complete.

Contacts

clearClose

Mains Distribution Unit

MO16839 – Sheet Steel Double Compartment Enclosure with Polyester Powder Coating on Free Standing Frame, complete with removable gland plate fitted to base. Ingress Protection IP65 c/w Padlockable hasp & 2x ¼ turn Double Bar Key Locks on Front Doors. Internal fittings:
Incoming supply Compartment – 200A 3P+N MCCB & variable RCD feeding compartment 2 MCB/RCBO protection for 6x externally mounted Socket outlets.
Safety Screens, Terminals, wiring & accessories supplied to complete.

Contacts

clearClose

Marina Distribution Box

MO16008 – Enclosure 655x450x220(HxWxD) Tais Cube Wall Mountable Heavy Duty GRP. Mounted on Free standing Frame.
Ingress Protection IP66 – c/w 2x ¼ Turn Tri-Key Locks on Single Transparent Front Door.
1x 125A 4pole Mains Isolator.
6x Single Phase MCBs for Supply Distribution
All Terminals, wiring & accessories supplied to complete.
(This style can be supplied with numerous combinations & qtys of equipment, available upon request)

Contacts

clearClose

Marina Distribution Power Cluster

MO16006 – 2x Topter Distribution Units Mounted on Free standing Frame.
Distribution Bank 1 –1x 2Pole Incoming Supply Isolating switch – 4x 16A 2P+E Switch Interlocked Sockets individually protected by 16A 2 Pole 30mA Trip RCBO,s complete with KWH Check Meters.
Distribution Bank 2 –1x 2Pole Incoming Supply Isolating switch – 4x 16A 2P+E Sockets individually protected by 16A 2 Pole 30mA Trip RCBO,s.
All Terminals, wiring & accessories supplied to complete
(This style can be supplied with numerous combinations & qtys of equipment, available upon request)

Contacts

clearClose

Sheet Steel Enclosure

MO17205- Sheet Steel Enclosure with Polyester Powder Coating on Free Standing Frame. Ingress Protection IP65 c/w Padlockable hasp & 2x ¼ turn Double Bar Key Locks on Single Front Door.
The external side faces and base can accommodate up to 30 socket outlets of varying ratings.
Internally mounted 16way TP&N populated (to suit socket selection) Pan assembly complete with Main Isolator – 250A 4 Pole Isolation switch.
All Terminals, circuit protection, wiring & accessories supplied to complete.

Contacts